Blow manufacturer and supplier from Mulan Group: Types of Blow Molding Processes – Blow molding encompasses three main types: extrusion blow molding (EBM), injection blow molding (IBM), and injection stretch blow molding (ISBM). In extrusion blow molding , molten plastic is extruded into a parison and then inflated inside a mold — ideal for making bottles, containers, and large industrial parts. Injection blow molding combines injection and blow molding by forming a preform first, then blowing it into shape; this yields precise, uniform parts commonly used in pharmaceuticals and cosmetics. Injection stretch blow molding adds a stretching step before blowing, improving strength and clarity — perfect for producing PET beverage bottles. Each method offers distinct advantages depending on production volume, material, and desired product characteristics. Choosing the right blow molding process involves balancing cost, speed, and performance requirements, making process selection a crucial part of manufacturing design. Read even more info on blow mold services.
Compression Molding vs. Injection Molding – Compression molding and injection molding are both key plastic-forming methods, but they differ in material behavior, cost, and part design flexibility. Compression molding typically uses thermosetting materials and reinforced composites, while injection molding primarily handles thermoplastics. The former is ideal for producing large, high-strength components, whereas the latter excels in small, precise, high-volume parts. Compression molding generally involves lower tooling costs and simpler mold designs but requires longer cycle times. In contrast, injection molding offers faster production rates but higher setup expenses. Compression molding also accommodates higher fiber content, providing superior mechanical properties and heat resistance. Consequently, manufacturers choose between the two based on performance needs and production scale. Many industries, including automotive and aerospace, use both processes strategically—compression molding for structural parts and injection molding for intricate or lightweight components.
If your product quantity is relatively small, we can provide fast mold service, which is a fast turnaround and low price mode, but the disadvantage is that the quality of the mold is not good, and it is unable to undertake too many product manufacturing tasks. From the design of the mold to the final test of the mold, all the processes are carried out in our internal injection workshop and the mold workshop. We reserve a lot of material warehouses for manufacturing high-quality molds, which are in line with most plastic products, there are many spare parts in reserve, we can call for use at any time. The injection molding workshop is next to the mold workshop. After the mold is manufactured, the injection molding equipment can be installed and tested within a few hours. This is the key to rapid response.
Blow molding is widely used in the production of hollow structure products, such as: water bottles, oil drums, chemical turnover barrels, floats, medical reagent bottles, etc. Injection blow molding is suitable for small container production, and stretch blow molding is suitable for medium and large-volume container products. However, the surface effect of injection blow molded products is better than stretch blow molding, and can be highly transparent and flat. Drinking water bottles are the most typical injection blow molding. Blow molding has many limitations due to the molding principle, so there are a few points that should be paid attention to when designing blow molding products: Only limited to hollow structural parts. The wall thickness is thin and the strength is low. By adding other materials in the multilayer part, the effect of blocking sound and heat sources is increased. (So not recyclable) A second trimming is required to remove burrs and excess material.
The process of rotational molding is much simpler than the manufacturing process that relies on pressure molding, but in fact it requires very rich experience and technical knowledge. While the material cannot be controlled by high pressure, the environmental temperature, environmental humidity, mold type, material specification, material Factors such as pretreatment quality will directly affect the final quality of rotomolding products. Put the powdered plastic into the hollow mold. Close the mold and rotate along the two axes. Heating the mold during the rotation process to melt the powder material. After all the materials are melted, cool the mold.After the product has solidified, open the mold and take out the product.
Sheet metal prototype is a method to quickly create design details of metal parts through manufacturing processes such as cutting, bending, stamping, and stretching of metal plates. In this process, it will try to use as little mold investment as possible. It is widely used in the development and research phase of metal products to help customers test product functionality and design rationality. More often, we rely on sheet metal prototype to provide metal inserts for the plastic molding process of in-mold molding, and the prototype can be produced within a few hours. Read extra info on china-plasticparts.com.
Mainly used as structural parts, connectors, protective parts and electrical insulation parts. It is widely used in industry, agriculture, transportation, electrical, chemical, construction, machinery and other fields. Because of the reliable quality of molded products, they have also been used in weapons, aircraft, missiles, and satellites. The molding cycle in the entire production process is long, the efficiency is low, and the staff has a large physical consumption. It is not suitable for molding complex products with depressions, side slopes or small holes.
Custom plastic injection moulding compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.MULAN summarizes the defects of past products, and continuously improves them. The specifications of custom plastic injection moulding can be customized according to your needs. MULAN is a leading manufacturer of customized stainless steel hoods in China. With an extensive range of products, MULAN offers unrivaled quality and innovative designs to meet the diverse needs of customers worldwide.
